Kite Fishing Accessories

Assorted end caps are available to fit whatever Paul's Fishing Kite you have.

A packet of 10 size 62 rubber bands specifically for the adjustable wings of the Flexiwing Kite.

18mm fluro red or yellow floating beads for fishing above the bottom. Great for threading onto any fishing trace system.

One section of blue sail repair tape 10cm x 10cm. The easy peel backing makes any small repairs simple. No sewing required. Just peel and stick!

One only 8mm Kite Dowel to fit the Large Skyhook, the Super Kite or the Nighthawk Kite.

A cylinder sinker with a seaharvester clip molded into it for easy line connection

A 1.5 metre length of braided cord with a size 5 coastlock clip attached at one end for easy connection to the kite.

One only 10mm hardwood kite dowel to fit the Super Kite or the Nighthawk Kite.

These incredibly efficient fishing hooks are fitted with a stainless steel wire appendage which is snelled to the hook. The wire protrudes backwards behind the shank of the hook.

A set of two hard wearing plastic cross spar locators for the wing spars of Super Kites and Nighthawks.

One only 2lb wheel to fit the rolling weight frame. Frame not included.

Kite Safety Floats are an ideal way to help keep your kite safe and prevent damage should it go into the water.

These incredibly efficient fishing hooks are fitted with a stainless steel wire appendage which is snelled to the hook. The wire protrudes backwards behind the shank of the hook.

One 4mm fibreglass rod to fit the Flexiwing Skyhook.

Drogues are more effective at stabilizing kites than conventional kite tails.

This drogue kit includes a pre-tied dacron bridle fitted with clips for attaching to either the Pocket Sled as a main bridle for the kite.

Super strong, light weight carbon fibre rod. One size fits all in the Flexiwing Kite. All the rods in the Flexiwing are the same length.

Hardwood kite cross spars. Strong, straight grained 8mm Tawa Kite Dowel spreader spars to fit the Large Skyhook, the Super Kite or the Nighthawk Kite.

A pack of 5 complete pre-tied traces including one 20mm fluro floating bead per trace. Designed to present your baits clear of the bottom. Available to fit PFS, Predator or Seahorse trace boards. Please specify when placing your order.

Be safe - Be seen. Let boat skippers see where your gear is fishing so they can avoid it.

A pack of 5 complete pre-tied traces including two 20mm floating beads per trace. Designed to present your baits clear of the bottom. Available to fit PFS, Predator or Seahorse trace boards. Please specify when placing your order.

Strong 10mm Tawa Kite Dowel to fit the Super Kite or the Nighthawk Kite.

A large red and green flag sewn directly onto heavy duty braided cord.

Strong 8mm and 10mm Tawa Kite Dowel.

These incredibly efficient fishing hooks are fitted with a stainless steel wire appendage which is snelled to the hook. The wire protrudes backwards behind the shank of the hook.

The new Kite Up-rigger Roller is ideal for lifting your mainline well clear of the water and away from the drag effects caused by rips and high surf

For all kitefishing, kontiki rigs or boat longlines! Ten complete traces expertly tied with a Seaguard Target Hook. Available to fit PFS, Predator or Seahorse trace boards. Please specify when placing your order.

Super lightweight design for downriggers.

Extremely corrosion resistant composite and stainless construction.

A set of two dynamically balanced fibreglass wing spars to fit the Nighthawk Kite.

One, super strong, lightweight carbon fibre rod to fit the Super Kite.

A set of two dynamically balanced fibreglass wing spars designed to fit the Super Kite.

Incorporating two 2lb wheels on a strong wire frame with a seaharvester clip and large swivel attached.

One, super strong, lightweight carbon fibre rod to fit the Nighthawk Kite.

A streamlined kite and drone release clip sensitive enough to be used in extremely light winds.

Complete pre-tied 65kg nylon kiteline with a large red and green flag and pre-tied bottle loop for 65kg to 100kg kitefishing rigs

The kite carry case offers complete safety and protection for your kites, safety floats and spare rods or dowel which are stored neatly inside

A heavy duty rolling weight incorporating six 2lb wheels on a strong wire frame with a seaharvester clip and large swivel attached.

A pre-tied 31kg Flexiwing Handspool ready to attach to your Flexiwing Rig.

A stylish PVC tube for storing and carrying kites which is lightweight and very portable.

AFTCO Flat Line clips put lines trolled into the water at a tension is set, lower angle to minimise tangling and keep your lures below the surface for better action.

Expertly pre-tied 15kg Pocket Sled Handspool with Kiteline, dropper line, bottle cord, leader line and two x three hook pre-stoppered hook sections.

A complete and expertly pre-tied 31kg Flexiwing Handspool with Kiteline for kite fishing.

Complete pre-tied 65kg Dropper Rig Handspool. Furnished ready to attach to your Dropper Rig.

Slotted ends on this 26 trace rack neatly hold your fishing traces in place under tension. Choose your hook size from drop down list.

Slotted ends on this 26 trace rack neatly hold your fishing traces in place under tension. Choose your hook size from drop down list. Free Upgrade To Floating Beads!

If you already have a kayak, surf ski, submarine or fishing kite and need all the fishing bits then this kit has everything you need to get you catching fish from shore