Drone Fishing Spares and Accessories

3 Ounce Breakout Sinkers with Heavy Duty Wires

Keep your remote safe from the sand by attaching a lanyard to it and having it around your neck.

To suit Newton 3 release clips on Condor and Xiro fishing drones. Large loop goes to the Newton clip. Also ideal for pin type release such as the release on the Splashdrone, and the clip on the SPRY+ drone.

Designed by Paul's Fishing Kites, this unique clip incorporates the quality crane swivel into the clip to prevent twisted traces.

NZ made Spectra has proven itself to be the best for kites and drones, lasting over a decade without deteriorating. This is the braid we use for all of our Condor and Splashdrone rigs. Sold per 100m but will come in a single length, just choose how long you need.

To suit Newton 3 release clips on Condor and Xiro fishing drones. Large loop goes to the Newton clip. Also ideal for pin type release such as the release on the Splashdrone, and the clip on the SPRY+ drone.

The perfect baits for a relaxing day of Kontiki or drone fishing. These are vacuum packed with 25 mixed pieces in each.

Quality salted bait. Mostly made with fresh fish. Great for kontiki, drone and longline fishing.

Quality salted bait. Mostly made with fresh fish. Great for kontiki, drone and longline fishing. Approximately 900g.

Quality salted bait. Mostly made with fresh fish. Great for kontiki, drone and longline fishing.

Implementing the proven running trace longline system into a ledger rig for boat fishing, the Target Snapper Ledger Rig uses two size Target Snapper Hooks, tied to swivels on the drop line. This allows the trace to act a lot more natural, resulting in bigger fish.

AEE Condor Propellers. Choose either a pair (one right and one left hand thread) or a complete set.

Perfect cutting board to save space, fits inside our small trace board. Trace board is 590mm x 175mm x 6mm, more than enough to cut up a whole mullet, squid, plus any other baits you're using.

These incredibly efficient fishing hooks are fitted with a stainless steel wire appendage which is snelled to the hook. The wire protrudes backwards behind the shank of the hook.

Designed by Paul's Fishing Kites, the inline swivel clip incorporates a top quality crane swivel directly into the wire clip.

For all kitefishing, kontiki rigs or boat longlines! Ten complete traces expertly tied with a Seaguard Target Hook. Available to fit PFS, Predator or Seahorse trace boards. Please specify when placing your order.

Fireproof Lipo safe bag for Lipo battery storage and charging, large space, highly sturdy, double zipper Lipo battery guard.

Get your burley into the Drop Zone with OANNES Drop Zone burley mesh

Stay safe and extend the life of your batteries with StoreSafe Smart LiPo Discharger for XT60 from VIFLY

8.5g lightweight, carry capacity up to 100g. Suitable for Lure and troll fishing, hovering fishing and long range casting. Compatible with Spry and Spry+ drone, may also fit other drones.

1.2m long, the reel seat is adjustable from the top all the way to the foot stand. Made of lightweight, strong aluminium that will never rust, rod cup and top glows in the dark.

A high vis, water resistant landing pad complete with ground pegs in a carry case.

Over 400 surfcasting/drone/kite/kontiki spots nationwide. A mix of spots from wharves to far-off rock ledges with access clearly shown.

Drone Fishing - Two 6 hook long-line backbone sections for clipping the traces to.

This is the best sinking braid on the market. Compare the sinking rate of this to all others, this is the fastest sinking. Tecni-Perline achieves this by using a Kevlar thread. Price is per 100m.

This is the best sinking braid on the market. Compare the sinking rate of this to all others, this is the fastest sinking. Tecni-Perline achieves this by using a Kevlar thread. Price is per 100m.

The Berkley fishing chair offers great comfort when fishing, thanks to its back. The rod rests can hold 2 rods for increased fishing comfort. Perfect for wharf or drone fishing.

A streamlined drone release clip sensitive enough to be used in extremely light drones, right up to 1500g.

OANNES Drone Landing pads are the largest foldable landing pads on the market and are perfect for Drone Fishing to keep the sand away from the drone and camera/bait release.

TrollSafe can be dynamically adjusted to release the payload from 500g to 8000g of tension, protecting your drone whatever the load.

This is the best sinking braid on the market. Compare the sinking rate of this to all others, this is the fastest sinking. Tecni-Perline achieves this by using a Kevlar thread. Price is per 100m.

A compact hardwood trace rack purpose built use on the beach or boat.

Drone Fishing - Two ten hook long-line backbone sections for clipping the traces to. Know your regulations - more than 7 hooks on a line is classed as a longline and requires a buoy on the end with your name and address.

The Landing Gear is specially designed for the Fisherman Fishing Drone.

Save space with this trace rack with 12 traces, with fillet board housed inside. Trace board is 590mm x 175mm x 6mm, more than enough to cut up a whole mullet, squid, plus any other baits you're using.

IDF-1355 high-performance carbon fiber propeller has good strength and high efficiency. It uses advanced Japanese Toray carbon fiber material, which has higher strength and better toughness than ordinary carbon fiber.

Ideal for holding SplashDrone 3 type batteries to your rod. Options with 8000mAh battery available, see drop down menu.

Already have a drone, rod, and reel? This pack has a small trace rack with 12 traces, 2 x 6 hook sections, and 2 x 3oz drone sinkers. Everything you need to get fishing.

Fisherman FD1 balance charger is used specifically to charge SwellPro's 4S high voltage lithium-polymer battery. It features 4 charging indicators to well inform the charging state of the battery.

The MOBULA propeller is made with carbon fibre to ensure its light weight and Strong Each Propeller is marked With CW or CCW (clockwise or counter-clockwise) it is important when replacing blades that you match the marking CCW with the CCW marking on the propeller and CW motors With CW propellers. This kit contains 2 x CCW 2 x CW propellers

The best way to charge your drone batteries on the go. This top quality 300w pure sine wave converter is ideal for the AEE Condor, Splashdrone, and SPRY+ drones that we sell.

SkyClip For Mavic Air 2 Series - Air 2S is a durable mechanical bait release designed for the safety of your DJI Mavic AIR 2 Drone while fishing.

SkyClip For Mavic Air Series is a durable mechanical bait release designed for the safety of your DJI Mavic AIR Drone while fishing.

SkyClip is a durable mechanical bait release designed for the safety of your DJI Phantom series Drone while fishing.

The rainproof backpack is specially designed for Splashdrone 4, which could free your hands and go out easily with your drone. It can carry the Drone, 2 spare batteries, Controller, Sets of propellers with ease.

Add more special effect and color to the epic aerial image with a set of filters specially made for SplashDrone 4.

This allows the SD4 to land in the water and be used as a boat.

The battery charger for Splashdrone 4.

6800mAh/11.1V battery to suit the AEE Condor fishing drone. Extend your fishing time by being able to cast another 4-5 lines without needing to charge your batteries between sets.

The new 4S High-Voltage battery charger is specially designed for SplashDrone 3PLUS's new High-Voltage battery (4S-LiHV) and the 2S remote battery.

8000mAh LiHV 15.2V 4S1P Lipo Battery. Specially made for the Splashdrone 3/3+ and Gannet Series 2 drones

GL-1 is an FPV goggle specially designed for Fisherman FD1, Spry+ and Splashdrone 3+, allows for a better, immersive, frictionless experience for aerial filming, fishing and FPV racing.

Specially designed to carry Mobula to Your fishing destination.

This backpack has a Specially designed cradle for holding the drone and seperate pouch for the controller, all making mobula easy to use and portable. Waterproof cover Pulls out from the bottom of the backpack to keep Mobula Protected. The Back Pack also has a convenient Front Pocket to store charger, spare props etc.

New generation Hybrid Electric and Mechanical Drone Release series used for Drone Fishing, Payload Delivery, Search & Rescue.

New generation Hybrid Electric and Mechanical Drone Release series used for Drone Fishing, Payload Delivery, Search & Rescue.

12v 40ah Li ion Battery 40A discharge. Comes standard with XT60 plugs but adapters are available for Seahorse type T connectors.

IB4 Intelligent Battery is specially designed for SplashDrone 4. It has an internal battery management system, teamed with 6600mAh of high-performance lithium technology cells to provide up to 30 minutes of flight time.

A smaller version of the popular Bulletfishing Kontiki winch, designed for bigger drones like the Aerokontiki, Rippton Mobula, CutaCopter, and the soon to be released AEE Condor Mark 4.